MONEL® Alloy Roundbars Available
Monel is a group of nickel alloys, primarily composed of nickel (up to 67%) and copper, with small amounts of iron, manganese, carbon, and silicon. Stronger than pure nickel, Monel alloys are resistant to corrosion by many agents, including rapidly flowing seawater. They can be fabricated readily by hot- and cold-working, machining, and welding.
MONEL ALLOY 400
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media, including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers.
The free-machining version of MONEL alloy 400. A controlled amount of sulfur is added to the alloy to provide sulfide inclusions that act as chip breakers during machining. Other characteristics are essentially the same as those of MONEL alloy 400. Used for meter and valve parts, fasteners and screw-machine products.
A precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of MONEL alloy 400 with greater strength and hardness. It also has low permeability and is nonmagnetic to temperatures as low as -150°F (-101°C). Used for pump shafts, oil-well tools and instruments, doctor blades and scrapers, springs, valve trim, fasteners and marine propeller shafts.
The registered trademark name, Monel, is applied as the prefix name to several corrosion resistant alloys produced by Special Metals Corporation. These alloys are nickel-based and exhibit traits that include high resistance to atmospheric corrosion, salt water, and various acid and alkaline solutions. Alloys of identical chemical and mechanical properties are available from other manufacturers and offer excellent alternatives to the various Monel® brand alloys.The corrosion-resistant alloy is widely used in the marine, oil and chemical processing industries.
OZAIRTRADELINK supplies Monel 400, 404 ,K-500 & R-405. Most of these grades are available in the form of plate, sheet, pipe, tubing, fittings, bar, wire and rod.
What are the Characteristics of Monel?
- Good resistance to acids such as hydrofluoric and sulfuric acid
- Highly resistant to alkalis
- Highly corrosion resistant
- Stronger than steel
In what Applications are Monel alloys used?
- Pump shafts, oil-well tools, instruments, doctor blades and scrapers, springs, valve trim, fasteners, marine propeller shafts
- Marine components
- Chemical and hydrocarbon processing equipment
- Valves, pumps, shafts, fittings, heat exchangers
Available in form
400, 404 ,K-500 & R-405. is also known for its ease of fabrication compared to other superalloys, and the fact that it is essentially nonmagnetic even at low temperatures. It is available in most popular forms including:
- Rod and Bar (hot-finished and cold-drawn)
- Sheet (cold rolled)
- Strip (cold rolled, annealed, spring tempered)
- Tube and Pipe, Seamless (cold-drawn, annealed and annealed and aged, as-drawn, as-drawn and aged)
- Plate (Hot Finished)
- Wire, Cold Drawn (annealed, annealed and aged, spring temper, spring temper aged)
Get QUICK QUOTE now (best price guaranteed)
Ozairtradelink specializes in MONEL® Alloy sheet, plates & bars. With years of experience in Stockist & Exporting inconel sheet, plates & bars. we are offer high quality, lower cost but the best service. As a result to that our export account today is in over 30 countries some of them are United States, United Arab Emirates, Canada, Pakistan, Spain, France, United Kingdom, Indonesia, Iran, Kuwait,Qatar,Yamen Mexico, Malaysia, Nigeria, Singapore, Saudi Arabia, Netherlands, Brazil, Colombia, Egypt, Iraq, Sri Lanka, Russia, Vietnam, South Africa, Nigeria, Turkey, Bangladesh, Italy, Japan, Thailand, Hong Kong, Switzerland, New Zealand We welcome your inquiries. We welcome your inquiries.